Welcome, Guest
Username: Password: Remember me
General Support

Post a message here if you are having trouble with a particular feature of your Amulet voice remote, or if you have a suggestion for features to include in a future software release.
  • Page:
  • 1

TOPIC: Learning IR codes from Pioneer remote doesn't work

Learning IR codes from Pioneer remote doesn't work 5 years 4 months ago #1362

  • Phobophile
  • Phobophile's Avatar
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Received my Amulet Remote recently and it's really great, but I've got one problem. When I try to learn some codes from my Pioneer VSX-S300 receiver (on-off, volume etc), the learning process goes as described in manual without any errors (and the button stops sending its original code, so I guess it learns something), but the button still doesn't work with the receiver. TV controls were learned ok. At the same time, I was able to learn and transmit these signals with USB-UIRT so I guess there's nothing wrong with the receiver or its remote.
Any advice please?
Last Edit: 5 years 4 months ago by Phobophile.
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.189 seconds
Powered by Kunena Forum